SteriPEN water purifier Classic 3
The SteriPEN Classic 3 water purifier uses ultraviolet light (UV-C rays) to remove bacteria, 99.9% of protozoa (including Giardia and Cryptosporidium) and viruses. It is extremely easy to use and allows you to treat water from almost any source with clear water. The Classic 3 water purifier has been the most widely used UV water purifier for over 15 years. The user-friendly LED display shows the treatment volume as well as the status of the UV lamp and the battery charge. Use the SteriPEN Classic 3 only in clear water, as cloudy, sediment-laden water will impair its effectiveness.
Application:
1. Remove the cap.
2. Press the activation button: 1 x for 1 liter, 2 x for 500 ml.
3. Hold the lamp in clear water until the water sensor pins are completely covered.
4. Stir the water until the green LED flashes. The water is now drinkable.
- Water source: tap water, clear water
- Number of people: 1, 2-5
- Effective against: bacteria, protozoa, cysts, viruses
- Flow rate: 500 ml = 48 seconds / 1 L = 90 seconds
- Output (L/click): 2 clicks = 500 ml, 1 click = 1 L
- Applications per battery charge: approx. 20/80-100/150
- Service life: 8000 activations
- Battery: 4 x AA
Application:
1. Remove the cap.
2. Press the activation button: 1 x for 1 liter, 2 x for 500 ml.
3. Hold the lamp in clear water until the water sensor pins are completely covered.
4. Stir the water until the green LED flashes. The water is now drinkable.
- Water source: tap water, clear water
- Number of people: 1, 2-5
- Effective against: bacteria, protozoa, cysts, viruses
- Flow rate: 500 ml = 48 seconds / 1 L = 90 seconds
- Output (L/click): 2 clicks = 500 ml, 1 click = 1 L
- Applications per battery charge: approx. 20/80-100/150
- Service life: 8000 activations
- Battery: 4 x AA
Product Information
Product Information
Shipping & Returns
Shipping & Returns
SteriPEN water purifier Classic 3
SteriPEN water purifier Classic 3
The SteriPEN Classic 3 water purifier uses ultraviolet light (UV-C rays) to remove bacteria, 99.9% of protozoa (including Giardia and Cryptosporidium) and viruses. It is extremely easy to use and allows you to treat water from almost any source with clear water. The Classic 3 water purifier has been the most widely used UV water purifier for over 15 years. The user-friendly LED display shows the treatment volume as well as the status of the UV lamp and the battery charge. Use the SteriPEN Classic 3 only in clear water, as cloudy, sediment-laden water will impair its effectiveness.
Application:
1. Remove the cap.
2. Press the activation button: 1 x for 1 liter, 2 x for 500 ml.
3. Hold the lamp in clear water until the water sensor pins are completely covered.
4. Stir the water until the green LED flashes. The water is now drinkable.
- Water source: tap water, clear water
- Number of people: 1, 2-5
- Effective against: bacteria, protozoa, cysts, viruses
- Flow rate: 500 ml = 48 seconds / 1 L = 90 seconds
- Output (L/click): 2 clicks = 500 ml, 1 click = 1 L
- Applications per battery charge: approx. 20/80-100/150
- Service life: 8000 activations
- Battery: 4 x AA
Application:
1. Remove the cap.
2. Press the activation button: 1 x for 1 liter, 2 x for 500 ml.
3. Hold the lamp in clear water until the water sensor pins are completely covered.
4. Stir the water until the green LED flashes. The water is now drinkable.
- Water source: tap water, clear water
- Number of people: 1, 2-5
- Effective against: bacteria, protozoa, cysts, viruses
- Flow rate: 500 ml = 48 seconds / 1 L = 90 seconds
- Output (L/click): 2 clicks = 500 ml, 1 click = 1 L
- Applications per battery charge: approx. 20/80-100/150
- Service life: 8000 activations
- Battery: 4 x AA
$75.62
SteriPEN water purifier Classic 3—
$75.62
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The SteriPEN Classic 3 water purifier uses ultraviolet light (UV-C rays) to remove bacteria, 99.9% of protozoa (including Giardia and Cryptosporidium) and viruses. It is extremely easy to use and allows you to treat water from almost any source with clear water. The Classic 3 water purifier has been the most widely used UV water purifier for over 15 years. The user-friendly LED display shows the treatment volume as well as the status of the UV lamp and the battery charge. Use the SteriPEN Classic 3 only in clear water, as cloudy, sediment-laden water will impair its effectiveness.
Application:
1. Remove the cap.
2. Press the activation button: 1 x for 1 liter, 2 x for 500 ml.
3. Hold the lamp in clear water until the water sensor pins are completely covered.
4. Stir the water until the green LED flashes. The water is now drinkable.
- Water source: tap water, clear water
- Number of people: 1, 2-5
- Effective against: bacteria, protozoa, cysts, viruses
- Flow rate: 500 ml = 48 seconds / 1 L = 90 seconds
- Output (L/click): 2 clicks = 500 ml, 1 click = 1 L
- Applications per battery charge: approx. 20/80-100/150
- Service life: 8000 activations
- Battery: 4 x AA
Application:
1. Remove the cap.
2. Press the activation button: 1 x for 1 liter, 2 x for 500 ml.
3. Hold the lamp in clear water until the water sensor pins are completely covered.
4. Stir the water until the green LED flashes. The water is now drinkable.
- Water source: tap water, clear water
- Number of people: 1, 2-5
- Effective against: bacteria, protozoa, cysts, viruses
- Flow rate: 500 ml = 48 seconds / 1 L = 90 seconds
- Output (L/click): 2 clicks = 500 ml, 1 click = 1 L
- Applications per battery charge: approx. 20/80-100/150
- Service life: 8000 activations
- Battery: 4 x AA
