Fire Starter Survival Bracelet Double Cobra
The EDCX Fire Starter Survival Bracelet Double Cobra black hides a combustible cord with ferro rod in its stylish exterior. It is water-repellent and easily ignitable, so you can start a fire in survival situations even without readily available tinder. The lanyard can be worn as a retention cord on a knife, on a key ring, as decoration on a backpack or on a belt. The black color combination has olive paracord on the inside with black paracord on the outside.
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
- Breaking load: 250 kg
- Width: 3 cm
Sizes:
- M = 22 cm
- L = 23.5 cm
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
- Breaking load: 250 kg
- Width: 3 cm
Sizes:
- M = 22 cm
- L = 23.5 cm
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Fire Starter Survival Bracelet Double Cobra
Fire Starter Survival Bracelet Double Cobra
The EDCX Fire Starter Survival Bracelet Double Cobra black hides a combustible cord with ferro rod in its stylish exterior. It is water-repellent and easily ignitable, so you can start a fire in survival situations even without readily available tinder. The lanyard can be worn as a retention cord on a knife, on a key ring, as decoration on a backpack or on a belt. The black color combination has olive paracord on the inside with black paracord on the outside.
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
- Breaking load: 250 kg
- Width: 3 cm
Sizes:
- M = 22 cm
- L = 23.5 cm
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
- Breaking load: 250 kg
- Width: 3 cm
Sizes:
- M = 22 cm
- L = 23.5 cm
Select Color
Select Size
From $3.82
Original: $10.92
-65%Fire Starter Survival Bracelet Double Cobra—
$10.92
$3.82Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The EDCX Fire Starter Survival Bracelet Double Cobra black hides a combustible cord with ferro rod in its stylish exterior. It is water-repellent and easily ignitable, so you can start a fire in survival situations even without readily available tinder. The lanyard can be worn as a retention cord on a knife, on a key ring, as decoration on a backpack or on a belt. The black color combination has olive paracord on the inside with black paracord on the outside.
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
- Breaking load: 250 kg
- Width: 3 cm
Sizes:
- M = 22 cm
- L = 23.5 cm
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
- Breaking load: 250 kg
- Width: 3 cm
Sizes:
- M = 22 cm
- L = 23.5 cm
