Fire starter keychain lanyard Lizzard
The Lizzard fire starter keychain hides a flammable cord with ferro rod inside its stylish exterior. It is water-repellent and easy to ignite, so you can start a fire in survival situations even without readily available tinder. The lanyard can be used as a lanyard on a knife, on your key ring, or worn as decoration on a backpack or belt.
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
Mass:
- Overall length: 17 cm
- Braided length: 9 cm
- Cord: 1.2 m
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
Mass:
- Overall length: 17 cm
- Braided length: 9 cm
- Cord: 1.2 m
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Fire starter keychain lanyard Lizzard
Fire starter keychain lanyard Lizzard
The Lizzard fire starter keychain hides a flammable cord with ferro rod inside its stylish exterior. It is water-repellent and easy to ignite, so you can start a fire in survival situations even without readily available tinder. The lanyard can be used as a lanyard on a knife, on your key ring, or worn as decoration on a backpack or belt.
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
Mass:
- Overall length: 17 cm
- Braided length: 9 cm
- Cord: 1.2 m
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
Mass:
- Overall length: 17 cm
- Braided length: 9 cm
- Cord: 1.2 m
Select Farbe
From $1.91
Original: $5.45
-65%Fire starter keychain lanyard Lizzard—
$5.45
$1.91Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Lizzard fire starter keychain hides a flammable cord with ferro rod inside its stylish exterior. It is water-repellent and easy to ignite, so you can start a fire in survival situations even without readily available tinder. The lanyard can be used as a lanyard on a knife, on your key ring, or worn as decoration on a backpack or belt.
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
Mass:
- Overall length: 17 cm
- Braided length: 9 cm
- Cord: 1.2 m
Procedure:
1) Prepare firewood: You can use the Kevlar saw to cut the wood into smaller pieces with smooth, even pulling motions and bundle it with the cord for transport to the fire site.
2) Undo the keychain: open the braid at the lower end and remove the flammable thread. Simply cut off the pendant and tie it back together.
3) Prepare the fire: Free the combustible cord from the paracord bracelet and fluff it up until it lies as a small bundle on the tinder.
4) Remove the protective layer: The protective layer on the fire steel must be scraped off before use so that a spark can be generated.
5) Ignite sparks: Hold the fire steel and the scraper at a sharp angle to each other and push the scraper over the fire steel with pressure until sparks are produced.
6) Fire: With these steps you can easily light a fire in a forest even with damp wood.
Mass:
- Overall length: 17 cm
- Braided length: 9 cm
- Cord: 1.2 m
